Whether the lathe spindle bearing is installed in place, its tightness will directly affect the normal operation of the lathe equipment . Sometimes lathe spindle bearing is installed, but with the long-term use of the equipment, the bearing will become loose, so the equipment will have problems such as jumping and instability, and it must be adjusted in time. So how to adjust the lathe spindle bearing if it is loose? Please continue reading this article.
How to adjust the loose spindle bearing of lathe
1. Before adjusting the lathe spindle bearing, be sure to disconnect the power supply and ensure that the lathe is turned off. Status;
2. Clean the spindle with detergent , Bearing area, no impurities, Dust, these foreign objects will affect the working condition of the bearing;
3. Depending on the lathe model, remove the protective cover until the bearing can be seen;
4. Check with a special wrench Is the bearing lock nut loose? If so, You can tighten the lock nut first. Then adjust the lock nut Or adjust the screw until the bearing preload is appropriate. Do not overload. Operation, otherwise the bearing may be damaged easily.
5. Use a micrometer to measure the radial runout of the spindle to ensure the value Within the allowable range. Excessive runout indicates insufficient preload. Or the bearing is worn, so it needs to be dealt with in a targeted manner;
6. After the adjustment is completed , you can add a certain amount of lubricating oil or grease, Keep the bearings in good lubrication condition.
7. Reinstall the disassembled parts. Protective cover, manually rotate the spindle to see if the bearing is working smoothly and whether there is any Abnormal noise problem.
8. Start the machine for trial operation and monitor Check the spindle operation. If the equipment has abnormal sound or vibration, To readjust or check if there are other question.
Matters Needing Attention in Loosening and Adjusting the Spindle Bearing of Lathe
1. Pay attention to safety and ensure All adjustment operations are performed in the power-off state. Prevent unexpected situations during operation.
2. Adjust the lathe spindle bearing Do not overload to avoid damaging the bearings , or affect the operation of the spindle.
3. Check the spindle bearings regularly and maintain them in time. Prevent problems from happening.
Conclusion
The bearings are not installed on the lathe and it is fine . As the lathe rotates continuously , the tightness will change , so the bearings need to be checked regularly . If you encounter problems during the adjustment of the spindle bearings , If you are not sure how to operate, it is recommended to refer to the lathe manual or Consult a bearing professional.
