Skip to content Our engineers often share knowledge about bearing applications, technologies, solutions and other related knowledge here, you can search for articles related to you to read.
The first stage is the embryonic stage of bearing failure. At this time, the temperature is normal, the noise is normal, the total vibration velocity and spectrum are normal, but the total peak energy and spectrum have signs. In the second stage, the temperature is normal, the noise increases slightly,
The preload methods of rolling bearings are divided into two categories: radial preload method and axial preload method. The radial preload method is also called radial top tightening method, which is mostly used in tapered bore bearings that bear radial loads; the axial preload method is also called axial preload
the continuous evolution of ball bearing materials and manufacturing technologies demonstrates the industry’s commitment to meeting the growing demands for durability, efficiency, and versatility. From advanced chrome alloys that enhance precision and reduce noise, to tungsten carbide for extreme durability, and innovative plastics for lightweight, corrosion-resistant applications, these advancements are
Rolling bearings have these advantages compared with sliding bearings: the friction coefficient of rolling bearings is smaller than that of sliding bearings, and the transmission efficiency is high. Rolling bearings are made of bearing steel, while sliding bearings use more expensive non-ferrous metals. Rolling bearings have more advantages in cost.
The correct maintenance method for rolling bearings is a complex and long-term task. It should be performed by trained professionals. Online inspections of rolling bearings should be performed every day and records should be kept. If problems are found, they should be eliminated in a timely manner. If safety hazards
Excessive temperatures during bearing operation can be caused by a variety of factors, the most common of which is insufficient lubrication, which causes increased friction and heat generation between the bearing surfaces; high operating speeds or heavy loads increase friction and also cause temperature increases; poor alignment or incorrect installation
Precision bearings are indispensable components in industries that require high precision, high reliability and high efficiency. In the aerospace industry, ceramics, titanium and high-grade stainless steel are the most suitable bearing materials; in the medical device industry, stainless steel, ceramics and PEEK are the most suitable bearing materials; in the
Common materials for bearings are: Carbon Steel, Chrome Steel, Stainless Steel, Ceramic, Plastic, Bronze, Titanium, Babbitt, a total of 8 types. The choice of material used in bearings is a critical factor that directly impacts their performance, lifespan, and suitability for specific applications. with the diverse range of bearing materials
The key points of reducing bearing noise are as follows: Choose low-noise special bearings or high-precision bearings; choose the correct lubricant and ensure that the bearings are regularly lubricated without pollution; use the correct installation method to ensure that the shaft and the bearing seat will not produce vibration and
Ceramic materials have excellent self-lubricating properties due to their high hardness and smoothness, and can meet general use conditions. If the equipment does not have high requirements for the speed, noise, temperature and other performance of the bearing, it can be put into use without lubrication. However, in most working
* vkuken takes your privacy seriously. All information is used for technical and commercial communication only and will not be disclosed to third parties. If you are interested in more bearing technology, you can click on this article for reference.
Optimized by Seraphinite Accelerator
